Architectural fees are generally proportional to construction costs. A higher construction cost represents more complex details and finishes, this includes the use of different equipment, usually when a construction site requires the use of equipment like overhead cranes, pavers and graders the cost will be higher. More complex details and finishes require more time-consuming design services. Thus, a higher-end space requires higher design fees.
These days, many of us tenant improvement architects are designing spaces that are more budget-conscious than image-conscious. Yet even the most cost-conscious clients must spend a minimum of about $50 per square foot for an interior office remodel, especially for a smaller space less with less economy of scale. Additionally, rooftop access doors located close to a leading edge leave little free space for the door to open but would be another ideal application for the parapet clamp system. Parapet wall clamping rails provide flexibility in sizing, see this company for more information.
Let’s use a 5,000 square foot space as an example. At $50 per square foot, $250,000 is a very bare-bones budget. If a space is in “shell” condition, $250,000 is not enough to build out even the most simple of spaces due to the needed HVAC and electrical infrastructure. However, if an office is “second-generation” space, meaning it’s an existing office that simply requires some re-work, $250,000 would be enough to make a few functional and aesthetic upgrades. Epoxy floor coating makes for a fantastic protective floor finish. They are made from a two pack epoxy resin that sets into a hard, smooth finish that is resistant to chemicals, solvents and staining. It is ideal for gargage floors and other high traffic areas due to the appealing aesthetics and durability of it as a decorative epoxy floor application perfecr for concrete flooring. Contreat are the Australian supplier of the sure floor range of epoxy floor coatings.
On a simple $50 per square foot project, basic architectural design fees might range anywhere from $2.00 per square foot to $4.00 per square foot, or $10,000 to $20,000 for the 5,000 square foot example. These basic services would most likely include: programming (about 5% of the fee), schematic design (about 10% of the fee), design development (about 20% of the fee), permit, bid, and construction drawings (about 45% of the fee), and construction administration (about 20% of the fee). Not included are mechanical and electrical engineering costs which might be an additional $1.50 to $2.00 per square foot, or $7,500 to $10,000. On small projects, the mechanical and electrical work are often design/build and not engineered. Structural engineering is typically not required for most office tenant improvements, however if it is needed, the cost would vary depending on the reason, but would most likely be in the $2,000 to $5,000 range for a small project. Furniture and decorating services might be an additional $1.00 to $1.50 per square foot. The above basic fee range also assumes that a CAD file of the existing floor plan and existing handicapped accessibility drawings for the building are provided by the landlord to the architect. Given everything just said, the total fees for a small tenant improvement project might be as high as $8 per square foot if some of these extra services are provided.
A good benchmark for fees on a small remodel project is about 10% of the construction cost without engineering, or about 15% of the construction cost with engineering. But since the construction cost is not determined until the architectural drawings are complete and bid, this benchmark is not very useful unless a solid construction budget is established before the start of the project. If so, the architect should design to that budget if it is realistic. A client should not give an architect an unreasonably low construction budget in order to keep the architectural fees as low as possible. The architect will let the client know if the budget is not feasible. Moreover, if a low budget is established, and the contracted architectural fees are thus proportionally low, the architect can only provide services relative to the construction budget and their fees. If the client drives a higher-end design, the architect will need to request additional fees, because a higher-end design requires the architect to spend more time on the project. An architect will tie their fees to the construction budget in their contract for this reason.
Sometimes, a client does not want to commit to the entire project until they have an idea of what the construction cost will be, and will retain the architect for programming through design development, or just enough to obtain a construction estimate from a contractor. If an architect is working without a construction budget in mind, and designing per the client’s direction without boundaries, the architect will most likely be compensated on an hourly basis, instead of a lump sum basis, at least through the design development phase, when the scope of the project is defined.
The above fee ranges apply to interior office tenant improvements, and assume that no work to the building core or shell is required. Banking, retail, restaurant, and other project types typically have higher fees.
Elisa Garcia, RA
Garcia Architects